BILL NUMBER: AB 1471 ENROLLED
BILL TEXT
PASSED THE SENATE SEPTEMBER 6, 2007
PASSED THE ASSEMBLY SEPTEMBER 10, 2007
AMENDED IN SENATE JULY 11, 2007
AMENDED IN SENATE JULY 5, 2007
AMENDED IN ASSEMBLY APRIL 10, 2007
INTRODUCED BY Assembly Member Feuer
(Principal coauthor: Assembly Member DeSaulnier)
(Coauthors: Senators Cedillo, Perata, Romero, and Scott)
FEBRUARY 23, 2007
An act to amend Section 12126 of the Penal Code, relating to
firearms.
LEGISLATIVE COUNSEL'S DIGEST
AB 1471, Feuer. Firearms: microstamping.
Existing law defines unsafe handguns as failing to pass certain
tests, or lacking certain features, as specified.
This bill, the Crime Gun Identification Act of 2007, would,
commencing January 1, 2010, expand the definition of "unsafe handgun"
to include semiautomatic pistols that are not designed and equipped
with a microscopic array of characters that identify the make, model,
and serial number of the pistol, etched in 2 or more places on the
interior surface or internal working parts of the pistol, and that
are transferred by imprinting on each cartridge case when the firearm
is fired. Those provisions would be subject to specified
certification procedures by the Department of Justice regarding the
use of that technology.
By expanding the definition of "unsafe handgun," the manufacture,
sale, and other specified transfer of which is a crime, this bill
would expand the scope of an existing crime, and thereby impose a
state-mandated local program.
The California Constitution requires the state to reimburse local
agencies and school districts for certain costs mandated by the
state. Statutory provisions establish procedures for making that
reimbursement.
This bill would provide that no reimbursement is required by this
act for a specified reason.
THE PEOPLE OF THE STATE OF CALIFORNIA DO ENACT AS FOLLOWS:
SECTION 1. This act shall be known, and may be cited as, the Crime
Gun Identification Act of 2007.
SEC. 2. Section 12126 of the Penal Code is amended to read:
12126. As used in this chapter, "unsafe handgun" means any
pistol, revolver, or other firearm capable of being concealed upon
the person, as defined in subdivision (a) of Section 12001, for which
any of the following is true:
(a) For a revolver:
(1) It does not have a safety device that, either automatically in
the case of a double-action firing mechanism, or by manual operation
in the case of a single-action firing mechanism, causes the hammer
to retract to a point where the firing pin does not rest upon the
primer of the cartridge.
(2) It does not meet the firing requirement for handguns pursuant
to Section 12127.
(3) It does not meet the drop safety requirement for handguns
pursuant to Section 12128.
(b) For a pistol:
(1) It does not have a positive manually operated safety device,
as determined by standards relating to imported guns promulgated by
the federal Bureau of Alcohol, Tobacco, and Firearms.
(2) It does not meet the firing requirement for handguns pursuant
to Section 12127.
(3) It does not meet the drop safety requirement for handguns
pursuant to Section 12128.
(4) Commencing January 1, 2006, for a center fire semiautomatic
pistol that is not already listed on the roster pursuant to Section
12131, it does not have either a chamber load indicator, or a
magazine disconnect mechanism.
(5) Commencing January 1, 2007, for all center fire semiautomatic
pistols that are not already listed on the roster pursuant to Section
12131, it does not have both a chamber load indicator and if it has
a detachable magazine, a magazine disconnect mechanism.
(6) Commencing January 1, 2006, for all rimfire semiautomatic
pistols that are not already listed on the roster pursuant to Section
12131, it does not have a magazine disconnect mechanism, if it has a
detachable magazine.
(7) Commencing January 1, 2010, for all semiautomatic pistols that
are not already listed on the roster pursuant to Section 12131, it
is not designed and equipped with a microscopic array of characters
that identify the make, model, and serial number of the pistol,
etched or otherwise imprinted in two or more places on the interior
surface or internal working parts of the pistol, and that are
transferred by imprinting on each cartridge case when the firearm is
fired, provided that the Department of Justice certifies that the
technology used to create the imprint is available to more than one
manufacturer unencumbered by any patent restrictions. The Attorney
General may also approve a method of equal or greater reliability and
effectiveness in identifying the specific serial number of a firearm
from spent cartridge casings discharged by that firearm than that
which is set forth in this paragraph, to be thereafter required as
otherwise set forth by this paragraph where the Attorney General
certifies that this new method is also unencumbered by any patent
restrictions. Approval by the Attorney General shall include notice
of that fact via regulations adopted by the Attorney General for
purposes of implementing that method for purposes of this paragraph.
The microscopic array of characters required by this section shall
not be considered the name of the maker, model, manufacturer's
number, or other mark of identification, including any distinguishing
number or mark assigned by the Department of Justice, within the
meaning of Sections 12090 and 12094.
(c) As used in this section, a "chamber load indicator" means a
device that plainly indicates that a cartridge is in the firing
chamber. A device satisfies this definition if it is readily visible,
has incorporated or adjacent explanatory text or graphics, or both,
and is designed and intended to indicate to a reasonably foreseeable
adult user of the pistol, without requiring the user to refer to a
user's manual or any other resource other than the pistol itself,
whether a cartridge is in the firing chamber.
(d) As used in this section, a "magazine disconnect mechanism"
means a mechanism that prevents a semiautomatic pistol that has a
detachable magazine from operating to strike the primer of ammunition
in the firing chamber when a detachable magazine is not inserted in
the semiautomatic pistol.
(e) As used in this section, a "semiautomatic pistol" means a
pistol, as defined in subdivision (a) of Section 12001, the operating
mode of which uses the energy of the explosive in a fixed cartridge
to extract a fired cartridge and chamber a fresh cartridge with each
single pull of the trigger.
SEC. 3. No reimbursement is required by this act pursuant to
Section 6 of Article XIII B of the California Constitution because
the only costs that may be incurred by a local agency or school
district will be incurred because this act creates a new crime or
infraction, eliminates a crime or infraction, or changes the penalty
for a crime or infraction, within the meaning of Section 17556 of the
Government Code, or changes the definition of a crime within the
meaning of Section 6 of Article XIII B of the California
Constitution.