AB 2415, as amended, Eduardo Garcia. California Clean Truck, Bus, and Off-Road Vehicle and Equipment Technology Program.
The California Global Warming Solutions Act of 2006 designates the State Air Resources Board as the state agency charged with monitoring and regulating sources of emissions of greenhouse gases. The act authorizes the state board to include the use of market-based compliance mechanisms. Existing law requires all moneys, except for fines and penalties, collected by the state board as part of a market-based compliance mechanism to be deposited in the Greenhouse Gas Reduction Fund and to be available upon appropriation by the Legislature.
The California Clean Truck, Bus, and Off-Road Vehicle and Equipment Technology Program, upon appropriation from the Greenhouse Gas Reduction Fund, funds zero- and near-zero-emission truck, bus, and off-road vehicle and equipment technologies and related projects, as specified, with priority given to certain
projects, including projects that benefit disadvantagedbegin delete communities.end deletebegin insert communities, as defined.end insert The program, until January 1, 2018, requires no less than 20% of the funding made available for the purposes of technology development, demonstration, precommercial pilots, and early commercial deployments of zero- and near-zero-emission medium- and heavy-duty truck technology support early commercial deployment of existing zero- and near-zero-emission heavy-duty truck technology.begin insert The program requires the state board to ensure that the results of emissions reductions or benefits can be measured or quantified.end insert
This bill, between January 2, 2018, and January 1, 2023, would require no less than 50% or $100,000,000, whichever is greater, of the moneys allocated each year for technology development, demonstration, precommercial pilots, and early commercial deployments of zero- and near-zero-emission medium- and heavy-duty truck technology be allocated and spent to support the commercial deployment of existing zero- and near-zero-emission heavy-duty truck technology that meets or exceeds a specified emission standard.begin insert The bill also would require the state board to post on its Internet Web site the results of emissions reductions or benefitsend insertbegin insert.end insert
Vote: majority. Appropriation: no. Fiscal committee: yes. State-mandated local program: no.
The people of the State of California do enact as follows:
Section 39719.2 of the Health and Safety Code
2 is amended to read:
(a) The California Clean Truck, Bus, and Off-Road
4Vehicle and Equipment Technology Program is hereby created,
5to be administered by the state board in conjunction with the State
6Energy Resources Conservation and Development Commission.
7The program, from moneys appropriated from the fund for the
8purposes of the program, shall fund development, demonstration,
9precommercial pilot, and early commercial deployment of zero-
10and near-zero-emission truck, bus, and off-road vehicle and
11equipment technologies. Priority shall be given to projects
12benefiting disadvantaged communities pursuant to the requirements
13of Sections 39711 and 39713.
14(b) Projects eligible for funding pursuant to this section
include,
15but are not limited to, the following:
16(1) Technology development, demonstration, precommercial
17pilots, and early commercial deployments of zero- and
18near-zero-emission medium- and heavy-duty truck technology,
19including projects that help to facilitate clean goods-movement
20corridors.
P3 1(A) Until January 1, 2018, no less than 20 percent of funding
2made available for the purposes of this paragraph shall support
3early commercial deployment of existing zero- and
4near-zero-emission heavy-duty truck technology.
5(B) (i) Between January 2, 2018, and January 1, 2023, no less
6than 50 percent or one hundred million dollars ($100,000,000),
7whichever is greater, of the moneys allocated each year
for the
8purposes of this paragraph shall be allocated and spent to support
9the commercial deployment of existing zero- and
10near-zero-emission heavy-duty truck technology that meets or
11exceeds an emission standard of 0.02 grams per brake
12horsepower-hour oxides of nitrogen, as described in the optional
13low oxides of nitrogen emission standards in Section 1956.8 of
14Title 13 of the California Code of Regulations.
15(ii) (I) Between January 2, 2018, and January 1, 2020, a
16heavy-duty truck with an internal combustion engine receiving
17moneys allocated pursuant to this subparagraph shall use not less
18than 30 percent renewable fuel.
19(II) Beginning January 2, 2020, a heavy-duty truck with an
20internal combustion engine receiving moneys allocated pursuant
21to this
subparagraph shall use not less than 50 percent renewable
22fuel.
23(III) The percentage in effect at the time the moneys are awarded
24to a heavy-duty truck with an internal combustion engine pursuant
25to this subparagraph shall not change that award.
26(IV) This subparagraph does not alter orbegin delete affect,end deletebegin insert affectend insert in any
27begin delete way,end deletebegin insert wayend insert the amount of credit or grants for which a
28low-carbon-fuel provider or truck operator is eligible pursuant to
29law.
30(2) Zero- and near-zero-emission bus technology development,
31demonstration, precommercial pilots, and early commercial
32deployments, including pilots of multiple vehicles at one site or
33region.
34(3) Zero- and near-zero-emission off-road vehicle and equipment
35technology development, demonstration, precommercial pilots,
36and early commercial deployments, including vehicles and
37equipment in the port, agricultural, marine, construction, and rail
38sectors.
39(4) Purchase incentives, which may include point-of-sale, for
40commercially available zero- and near-zero-emission truck, bus,
P4 1and off-road vehicle and equipment technologies and fueling
2infrastructure to support early market deployments of alternative
3technologies
and to increase manufacturer volumes and accelerate
4market acceptance.
5(5) Projects that support greater commercial motor vehicle and
6equipment freight efficiency and greenhouse gas emissions
7reductions, including, but not limited to, advanced intelligent
8transportation systems, autonomous vehicles, and other freight
9information and operations technologies.
10(c) The state board, in consultation with the State Energy
11Resources Conservation and Development Commission, shall
12develop guidance through the existing Air Quality Improvement
13
Program funding plan process for the implementation of this
14section that is consistent with the California Global Warming
15Solutions Act of 2006 (Division 25.5 (commencing with Section
1638500)) and this chapter.
17(d) The guidance developed pursuant to subdivision (c) shall
18do all of the following:
19(1) Outline performance criteria and metrics for deployment
20incentives. The goal shall be to design a simple and predictable
21structure that provides incentives for truck, bus, and off-road
22vehicle and equipment technologies that provide significant
23greenhouse gas reduction and air quality benefits.
24(2) Ensure that program investments are coordinated with
25funding programs developed pursuant to the California
Alternative
26and Renewable Fuel, Vehicle Technology, Clean Air, and Carbon
27Reduction Act of 2007 (Chapter 8.9 (commencing with Section
2844270) of Part 5).
29(3) Promote projects that assist the state in reaching its climate
30goals beyond 2020, consistent with Sections 38550 and 38551.
31(4) Promote investments in medium- and heavy-duty trucking,
32including, but not limited to, vocational trucks, short-haul and
33long-haul trucks, buses, and off-road vehicles and equipment,
34including, but not limited to, port equipment, agricultural
35equipment, marine equipment, and rail equipment.
36(5) Implement purchase incentives for eligible technologies to
37increase the use of the cleanest vehicles in disadvantaged
38communities.
P5 1(6) Allow for remanufactured and retrofitted vehicles to qualify
2
for purchase incentives if those vehicles meet warranty and
3emissions requirements, as determined by the state board.
4(7) Establish a competitive process for the allocation of moneys
5for projects funded pursuant to this section.
6(8) Leverage, to the maximum extent feasible, federal or private
7funding.
8(9) Ensure that the results of emissions reductions or benefits
9can be measured or quantified.begin insert The state board shall post on its
10Internet Web site every two years the results of those measurements
11or quantifications.end insert
12(10) Ensure that activities undertaken pursuant to
this section
13complement, and do not interfere with, efforts to achieve and
14maintain federal and state ambient air quality standards and to
15reduce toxic air contaminants.
16(e) In evaluating potential projects to be funded pursuant to this
17section, the state board shall give priority to projects that
18demonstrate one or more of the following characteristics:
19(1) Benefit disadvantaged communities pursuant to Sections
2039711 and 39713.
21(2) The ability to leverage additional public and private funding.
22(3) The potential for cobenefits or multiple-benefit attributes.
23(4) The potential for the project to be replicated.
24(5) Regional benefit, with focus on collaboration between
25multiple entities.
26(6) Support for technologies with broad market and emissions
27reduction potential.
28(7) Support for projects addressing technology and market
29barriers not addressed by other programs.
30(8) Support for enabling technologies that benefit multiple
31technology pathways.
32(f) In the implementation of this section, the state board, in
33consultation with the State Energy Resources Conservation and
34Development Commission, shall create an annual framework and
35plan. The framework and plan shall be developed with
public input
36and may utilize existing investment plan processes and workshops
37as well as existing state and third-party research and technology
38roadmaps. The framework and plan shall do all of the following:
39(1) Articulate an overarching vision for technology development,
40demonstration, precommercial pilot, and early commercial
P6 1deployments, with a focus on moving technologies through the
2commercialization process.
3(2) Outline technology categories, performance criteria, and
4required mandates for technologies and applications that may be
5considered for funding pursuant to this section. This shall include
6technologies and low-carbon-fuel requirements for medium- and
7heavy-duty trucking, including, but not limited to, vocational
8trucks, short-haul and long-haul trucks,
buses, and off-road vehicles
9and equipment, including, but not limited to, port equipment,
10agricultural equipment, construction equipment, marine equipment,
11and rail equipment.
12(3) Describe the roles of the relevant agencies and the process
13for coordination among agencies, program participants, and
14low-carbon-fuel providers.
15(g) For purposes of this section, the following terms have the
16following meanings:
17(1) Effective January 2, 2018, “Heavy-duty truck” means a
18vehicle that has a gross vehicle weight rate (GVWR) of 26,001
19pounds or more.
20(2) “Zero- and near-zero-emission” means vehicles, fuels, and
21related technologies that reduce greenhouse gas
emissions and
22improve air quality when compared with conventional or fully
23commercialized alternatives, as defined by the state board in
24consultation with the State Energy Resources Conservation and
25Development Commission. “Zero- and near-zero-emission” may
26include, but is not limited to, zero-emission technology, enabling
27technologies that provide a pathway to emissions reductions,
28advanced or alternative fuel engines for long-haul trucks, and
29hybrid or alternative fuel technologies for trucks and off-road
30equipment.
O
98