BILL NUMBER: AB 2030	ENROLLED
	BILL TEXT

	PASSED THE SENATE  AUGUST 22, 2012
	PASSED THE ASSEMBLY  AUGUST 27, 2012
	AMENDED IN SENATE  MAY 31, 2012

INTRODUCED BY   Assembly Member Olsen

                        FEBRUARY 23, 2012

   An act to add Section 18934.9 to the Health and Safety Code,
relating to building standards.


	LEGISLATIVE COUNSEL'S DIGEST


   AB 2030, Olsen. Building standards: press boxes.
   The California Building Standards Law provides for the adoption of
building standards by state agencies by requiring all state agencies
that adopt or propose adoption of any building standard to submit
the building standard to the California Building Standards Commission
for approval and adoption.
   This bill would require the commission, as part of the next
triennial building code cycle that begins on or after January 1,
2013, to adopt standards for press boxes that require that the press
boxes, as defined, are located on a route that is accessible to
persons with disabilities. The bill would exempt from this
requirement press boxes that are located and structured according to
prescribed specifications.


THE PEOPLE OF THE STATE OF CALIFORNIA DO ENACT AS FOLLOWS:

  SECTION 1.  Section 18934.9 is added to the Health and Safety Code,
to read:
   18934.9.  (a) For purposes of this section, "press box" means a
space reserved for reporters, press, or other media at a stadium.
   (b) (1) The commission, as part of the next triennial building
code cycle that begins on or after January 1, 2013, shall adopt
standards for press boxes that require that the press boxes are
located on a route that is accessible to persons with disabilities.
   (2) Standards adopted by the commission pursuant to paragraph (1)
shall not apply to both of the following:
   (A) A press box in bleachers that have points of entry at only one
level, provided that the aggregate area of all press boxes is at a
maximum of 500 square feet.
   (B) A free-standing press box that is elevated above 12 feet
minimum grade, provided that the aggregate area of all press boxes is
at a maximum of 500 square feet.
   (3) For purposes of this subdivision, where a facility contains
multiple assembly areas, the aggregate area of press boxes in each
assembly area shall be calculated separately.